Welcome! Log In Create A New Profile


Solar cell packaging material——EVA

Posted by molan 
Solar cell packaging material——EVA
May 23, 2022 09:27AM
Since the 1990s, EVA has been the most critical packaging material for solar cells. The full name of EVA is ethylene and vinyl acetate copolymer. In its preparation process, EVA resins with different VA contents can be obtained by adjusting the ratio of the two monomers, and different molecular weights can be obtained by controlling the polymerization process (tubular or kettle type). Distribute EVA resin with different melt index MI, and then apply it in different fields.

The encapsulation materials for solar cells generally need to be crosslinked and cured to ensure the excellent performance of the entire encapsulation system. Commonly used crosslinkers are peroxide crosslinkers such as TBEC. The crosslinking mechanism of EVA is as follows: Peroxy radicals take hydrogen on the methyl group on the side chain of vinyl acetate to generate macromolecular chain free radicals, and then the two macromolecular chain free radicals undergo a coupling reaction to form a network structure.

Some co-crosslinking agents containing multiple double bonds, such as TAIC, are usually added further to improve the crosslinking efficiency and point density. The crosslinking degree of the packaging material has a significant influence on the reliability of the entire packaging system. In practical applications, the crosslinking degree needs to be strictly controlled.


As a packaging material, the most critical problem of EVA is the aging problem caused by ultraviolet light and moist heat oxidation. Yellowing is mainly caused by the conjugated groups generated during the aging and degradation. Generally, there are two main paths: 1. EVA is degraded by photothermal oxidative degradation (Norrish II), 2. Residual crosslinking agent and antioxidant interaction.

To solve the problem of yellowing, antioxidants, light stabilizers, UV absorbers, and heat stabilizers are usually added. The interaction between the additives and the resin matrix needs to be considered when selecting these additives. Common antioxidants (free radical capture type) are hindered phenols.

Usually also need to add a certain amount of co-antioxidants (decomposing hydroperoxides), typically phosphites.

EVA film must solve ultraviolet light aging is also a problem, and ultraviolet light absorbers and ultraviolet light stabilizers are usually added.

Another common type of failure is delamination, which can occur at any interface in contact with EVA, such as delamination between EVA and front glass material, between EVA and ribbon or busbar, and Delamination between EVA and cell surface. Some coupling agents are usually added to the film to increase the adhesion between EVA and various materials.

In addition, according to the actual processing and application needs, some additives such as heat stabilizers, tackifiers, and plasticizers should be added.
Re: Solar cell packaging material——EVA
April 19, 2023 07:54AM
Really important element for solar cells.

Female anchors in Goa
Female anchors in Chandigarh
Sorry, only registered users may post in this forum.

Click here to login