C580 PG Universal Spring Coiling Machine

C580 PG Universal Spring Coiling Machine


Tension or compression springs, electrical coils, etc., of any length or inside diameter made quickly and simply without the expense of setting up special machinery.Get more news about Universal Spring Machine,you can vist our website!
Features:

Wire being fed through the handle ensures absolute safety in operation.
The tension of the wire can be easily adjusted both before and, if required, during actual operation.
Any thickness of wire can be used up to 3/16" dia.
Distance between the separate turns of the spring can be preselected and fixed in a reliable manner.
Compact in design and easy in operation.
Simple to Use

Select a mandrel to suit the desired inside diameter and length of the component to be made allowing for the fact that there is a tendency for the completed spring or coil to relax slightly when removed from the mandrel.
Slacken the knurled out of the Spring Winder, feed the wire through the hole in the handle and in the spindle then between the steel disc and the plastic disc.
Grip one end of the mandrel with the end of the wire in the chuck of a lathe.
Turn the chuck very slowly by hand and adjust the pressure between the tow discs with the knurled nut.
Set the lathe to the slowest speed available and switch on.
General coiling spring can be directly produced by inputting spring diameter, OD, pitch, and the number of coils.
• Provide window editing interface, such as copy, paste, insert, replace, delete, edit command, makes inputting simple, fast & flexible.
• Optional free length detection device. It can automatically correct the pitch to ensure production accuracy.
• Optional video camera test system for tight tolerances.
• Optional defect wire detection system to ensure wire quality.